Sponsor


GA-ASI completes successful first flights of Lynx radar on Sky Warrior UAV

July 1, 2009

SAN DIEGO, 1 July 2009. General Atomics Aeronautical Systems, Inc. (GA ASI) announced that its Lynx Block 30 Synthetic Aperture Radar/Ground Moving Target Indicator (SAR/GMTI) radar has completed two successful test flights on a Sky Warrior Block 1 unmanned aerial vehicle (UAV) in support of the planned Quick Reaction Capability (QRC) deployment of the first four Sky Warrior aircraft under the U.S. Army Extended Range/Multi-Purpose (ER/MP) UAV Program.

The flights were conducted in March. Numerous SAR (spot and stripmap) images were taken at various ranges and resolutions via GA-ASI's CLAW sensor control and exploitation software in the Army's One System Ground Control Station (OSGCS); Change Detection products were calculated and displayed. In addition, the GMTI mode was used to detect and track moving objects in real-time.

"We are pleased to have the opportunity to continue to support the Army in its efforts to deliver the latest RSTA [Reconnaissance, Surveillance, Target Acquisition technology to the war fighter on an expedited basis," says Linden Blue, president, Reconnaissance Systems Group, General Atomics Aeronautical Systems, Inc. "These test flights demonstrated that the ER/MP aircraft, outfitted with EO/IR [Electro-Optical/Infrared] and Lynx SAR/GMTI payloads and controlled by the OSGCS, will provide significant situational awareness capability to the warfighter."

Since completing the delivery of the original eight Lynx II radars to the Army last year on the radar System Design and Development (SDD) program, GA-ASI has implemented numerous improvements to the radar in its continuing commitment to enhance capabilities and boost performance. Contractor flights with the Block 30 radar configuration have demonstrated SAR and GMTI performance consistent with the threshold level requirements in the ER/MP Capabilities Production Document (CPD). A contract was awarded to GA-ASI on May 1 to update the eight Lynx II radars to the Block 30 configuration in support of Quick Reaction Capability 1 (QRC1).

The Lynx Block 30 radar provides the all-weather precision capability to detect time-sensitive targets and offers a long-range, wide-area surveillance capability that can provide high-resolution SAR imagery at slant ranges well beyond effective EO/IR range. It also incorporates a broad area GMTI scanning capability to detect moving vehicles, and can cross-cue to an EO/IR payload via the CLAW payload control software.

Social Media Tools

Sponsored by:
Recommend this Article Recommend this Article () You Recommended this Article You Recommended this Article ()

REPRINTS: Is your company featured in this article? Click here to purchase reprints.            Go to Home Page


Most Popular Articles

Wire News provided by   

Webcasts

Upcoming

High Performance Embedded Computing for Rugged Mobile Applications

High-performance embedded computing, often referred to as HPEC, is increasing in importance for rugged mobile applications such as land vehicles, unmanned aerial vehicles, unmanned underwater vehicles, and a...
( 06/14/2012 / 02:00 PM EST5EDT / 01:00 PM CST6CDT / 11:00 AM PST8PDT / 06:00 PM GMT )

On Demand

A Deep Look at the Pentagon's 2013 Budget Request for Electronics and Electro-optics Technologies

John Keller, chief editor of Military & Aerospace Electronics, brings his 30-plus years of experience covering the aerospace and defense industry to this interactive webcast.

Mil & Aero Magazine

May 2012
Volume 23, Issue 5

M&AE Article Archives

Close this offer Close
Military & Aerospace Electronics Defense Executive Ebedded Computing Report Avionics Intelligence
Subscribe
FREE Newsletters from the Aerospace & Defense Media Group
Required field
Required field
Required field
I would like to receive the following e-mail newsletters
Military & Aerospace Electronics Weekly Yes No Required field
Defense Executive Yes No Required field
Embedded Computing Report Yes No Required field
Avionics Intelligence Yes No Required field
In order to subscribe, you must select at least one newsletter above.
No Thanks. No Thanks