Save Article Instructions
Close 

Industry to receive details of plan to demonstrate advanced cooling for embedded computing

ARLINGTON, Va., 23 Jan. 2013. U.S. military researchers plan to brief industry on a project to demonstrate advanced electronics cooling techniques for RF monolithic microwave integrated circuit (MMIC) power amplifiers and high performance embedded computer modules that would design convective or evaporative microfluidic cooling directly into the electronic devices and packaging.

Scientists at the U.S. Defense Advanced Research Projects Agency (DARPA) in Arlington, Va., will release details to industry on 7 Feb. 2013 about the second phase of the Intrachip/Interchip Enhanced Cooling (ICECool) program, which seeks to apply intrachip and interchip microfluidic cooling and on-chip thermal interconnects to RF MMICs and powerful embedded computing boards.

DARPA released a broad agency announcement (DARPA-BAA-12-50) last summer for the first phase of the ICECool program, called ICECool Fundamentals, which is exploring revolutionary thermal-management technologies for military electronics to help designers make substantial reductions in size, weight, and power consumption (SWaP).

The 7 Feb. briefings concern the ICECool Applications program. DARPA officials say they expect to release a BAA for the ICECool Applications program sometime before the 7 Feb. briefings, which will be at the Westin Arlington Gateway Hotel at 801 N. Glebe Road in Arlington, Va.

Related stories

-- DARPA asks industry to develop microelectronics with cooling built right into the chip

-- Embedded thermal management from Mercury increases cooling from 15 to 50 Watts per mezzanine site

-- Military electronics cooling and thermal management issues press for new materials development, potential move away from COTS.

Briefings will include an ICECool vision presentation by Dr. Avram Bar-Cohen, the DARPA ICECool Applications program manager, brief presentations by academic and industry teams on current and planned embedded cooling efforts, and advice on responding to DARPA solicitations. Individual meetings with Bar-Cohen will be available.

The goal of the ICECool Applications program is to enhance the performance of defense electronics by removing one kilowatt per square centimeter heat flux, as well as one kilowatt per cubic centimeter heat density in RF MMICs and high-performance embedded computing boards.

Essentially, DARPA scientists want to make cooling just as important as any other aspect of chip design, and use embedded thermal management to enhance the performance of military electronics. Integrating chips with convective or evaporative microfluidic cooling, DARPA officials say, has the potential to speed the evolution of advanced chip integration.

One fundamental problem that electronic systems designers have today is the large size and weight of cooling subsystems. Ever-smaller chip geometries generate increasing amounts of heat, and the ability to cool electronics is moving more slowly than the ability to shrink chip densities.

This causes some advanced electronics to perform well below the inherent electrical limits of the device technology. Integrating cooling directly into the chip could transform electronic systems architectures and overcome the SWaP bottleneck in advanced electronics, DARPA officials say.

The ICECool program will complement other DARPA thermal-management initiatives, such as the Thermal Ground Plane (TGP) program to develop modern high-performance heat spreaders to replace the copper alloy spreaders in conventional systems; the Microtechnologies for Air Cooled Exchangers (MACE) program to develop enhanced heatsinks that reduce the thermal resistance and power requirements for cooling fans; and the Active Cooling Module (ACM) program to develop miniature, active, high-efficiency refrigeration systems based on thermoelectric or vapor-compression technologies.

Those interested in attending the ICECool Applications briefings should register online at https://safe.sysplan.com/confsys/icecool/index.html. Attendance costs $90.

E-mail questions or concerns to DARPA at DARPA-SN-13-17@darpa.mil with "ICECool Applications Proposers Day" in the subject line.

More information is online at https://www.fbo.gov/spg/ODA/DARPA/CMO/DARPA-SN-13-17/listing.html.


To access this Article, go to:
http://www.militaryaerospace.com/content/mae/en/articles/2013/01/DARPA-ICECool-Applications.html