A COTS response to the IED threat

John Keller, Editor in Chief

Improvised explosive devices (IEDs), the specific name for many of the roadside bombs that commonly kill soldiers and civilians alike in dangerous regions of the world, have been among the most dangerous threats in contested areas of the Middle East.

Among the reasons that IEDs are so dangerous are their easy and inexpensive manufacture and detonation. Terrorists throughout the region apparently find it stunningly easy to obtain artillery shells, missile warheads, mortar rounds, and other high explosives for quick conversion to IEDs.

The terrorists simply rig them with cheap RF detonators and bury them where military convoys or other targets of opportunity are likely to pass by. When the targets are in range, they trigger the explosives with radio signals from cell phones, garage-door openers, or other easily obtained devices.

Most often nobody is in evidence at the explosion site-except the victims, of course-so military forces and civilians typically are forced to endure the frustration of standing by, powerless to do much other than mourn the losses of their comrades and neighbors.

That is until now.

U.S. Marine Corps personnel in Iraq are using commercial off-the-shelf (COTS) handheld spectrum analyzers from such companies as Rohde & Schwarz in Munich, Germany, and Boonton Electronics in Parsippany, N.J., to sniff out, pinpoint, and retaliate against those triggering IEDs with cell phones, garage-door openers, or other RF devices.

The handheld spectrum analyzers used, such as the Rohde & Schwarz handheld Spectrum Analyzer R&S FSH, are nonruggedized, commercial-grade, off-the-shelf devices that were never designed for the harsh temperatures, dust, and shock of military operations in the Middle East.

Still, the imperative for the Marines and other fighting forces to make use of what is available as quickly as possible has been the driving force for bringing COTS hand-held spectrum analyzers into the military theaters of Iraq and Afghanistan.

Boonton also offers the 9102 hand-held spectrum analyzer that could well be a candidate for counter-IED operations in Iraq and elsewhere.

Devices like the Rohde & Schwarz R&S FSH and the Boonton 9102 are designed for field operations, but perhaps not to the demanding requirements of the military. Typical users are cell-phone- tower repair personnel, radio technicians who are adjusting antenna arrays, and even U.S. Navy personnel seeking to calibrate the forests of antennas on the decks of modern warships.

“We designed the handheld spectrum analyzer for technicians to climb a mast and check an antenna,” explains Pete Sakell, the government, military, and aerospace business development manager at the Rohde & Schwarz office in Columbia, Md. The company introduced the R&S FSH device in July 2005.

The handheld spectrum analyzers were designed with broad capabilities in mind, but it’s likely that no one ever imagined what these devices could provide for Army and Marine Corps convoys whose members sometimes have to fight for their lives in IED-related ambushes.

These spectrum analyzers enable fighting forces on the ground to detect cell-phone and garage-door-opener RF emissions at the moment they are sent. This yields valuable intelligence information about the RF frequencies that terrorists use to detonate their IEDs.

Armed with this intelligence, convoys can start sending out jammers that broadcast strong “white noise” signals in the RF spectra where the IED detonators operate, which can render the IEDs useless and keep military convoys and other targets safe. “The military can send out a convoy with a jammer to prevent the RF trigger from detonating IEDs,” Sakell explains.

Handheld spectrum analyzers in the hands of fighting forces in the field may be helping military leaders to devise a variety of counter-forces to the IED threat.

“There are two modes to a jammer, active and passive mode,” Sakell explains. “You can have a white-noise generator in the 2 MHz to 2 GHz range, or you could have a smart jammer that simply listens for a trigger signal, and then respond in that frequency range.”

For refining methods to counter IEDs, some of the handheld spectrum analyzers also can emit RF signals, which in normal operations are used to test commercial RF equipment.

For security reasons, Sakell cannot go into detail about how, where, and why U.S. military forces are using the Rohde & Schwarz handheld spectrum analyzers to help safeguard against terrorist attacks. He does volunteer, however, “Has it been effective against IEDs? We have been told good things.”

As effective as these handheld spectrum analyzers appear to be for military forces in the field, the jury is still out on how well these devices will hold up to the environmental extremes of Iraq and Afghanistan-particularly against never-ending exposure to the talcum-power-fine dust that permeates the region.

Rohde & Schwarz’s Sakell says his company has no immediate plans to produce a version that is more rugged than the R&S FSH, but says he is open to ideas and potential partnerships with companies like DRS Tactical Systems Inc. in Palm Bay, Fla., which are experts in ruggedized packaging for COTS electronic devices.

The notion of a military-rugged hand-held spectrum analyzer in wide use among fighting forces in the field certainly tickles the imagination, and may well give rise to new applications that haven’t even been thought of yet.

Military & Aerospace Photos

Most Popular Articles

Related Products

CHAMP-FX4 6U OpenVPX Virtex-7 FPGA Processor Card

The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Defense Solutions’ family of user-prog...

PMC-E2001 Audio/Acoustic Waveform Generating PMC Card

PMC-E2001 Delta-sigma PMC features 16-bit resolution with 8 Analog Outputs and 4 Analog Inputs wi...

VPX3-453 3U VPX Virtex-6/8640D Digital Signal Processor

The Curtiss-Wright VPX3-453 is a high performance 3U VPX DSP and FPGA processor card that combine...

SBC-K7 Embedded PC for Instrumentation and Control

The SBC-K7 is an ideal platform for embedded instrumentation that combines an Atom PC running Win...

PC/104 SBC and Peripherals

Kontron PC/104 Standalone Single Board Computers (SBCs) serve in every format, even with consiste...

Rugged Mobile Communications Server

Advanced communications server designed to be deployed in environments where it needs to meet cer...


Dual-Port Simulator/Analyzer Test & Simulation PCI Express Module Supports Point-to-Point, Switch...

fcXplorer GUI Analyzer Software

fcXplorer, AIT's Fibre Channel Simulator and Analyzer Test Software provides an intuitive Graphic...

1553 databus coupler

One through ten stubs in box enclosures. All types of 1553 connectors applied. Tested to high env...

PW-82530N0 3-Phase BLDC Motor Torque Controller

The PW-82530N0 is a high performance, low-cost torque loop controller designed to precisely regul...

Related Companies

Curtiss-Wright Defense Solutions

About Curtiss-Wright Defense Solutions Curtiss-Wright Defense Solutions (CWDS) is a long established techno...

Innovative Integration

  Since 1988, Innovative Integration has grown to become one of the world's leading suppliers of DSP and data ac...


Driving the world’s embedded computing platforms Kontron is a global leader in embedded computing technology.&n...

Elma Electronic Inc

Who we are...   About Elma Electronic Systems   The Systems division of Elma Electronic Inc. supplies the

Extreme Engineering Solutions Inc (X-ES)

 Extreme Engineering Solutions, Inc. (X-ES) is a leader in the design, manufacture, and support of standard and ...

Raycom Electronics

Raycom Electronics, Inc., a subsidiary of Electro Technik Industries (ETI), was incorporated in 1965.  The compa...

Intersil Corp

Intersil is leveraging a deep portfolio of intellectual property, a history of design and process innovation and a sy...

Thermacore Inc

Specializes in the custom design, development, and manufacturing of highly engineered thermal management solutions fo...

HGH Infrared Systems

Offers a 360 degree, real-time, panoramic IR thermal imaging camera, the IR Revolution 360 exceptional image quality,...

Teledyne Relays US

Provides switching solutions with design, development, manufacturing, and test facilities. The lines of ultra miniatu...
Wire News provided by   

Press Releases

Low Viscosity, One Part Cyanoacrylate Is Non-Toxic and Meets ISO 10993-5 Specifications

Master Bond MB250NT is widely used for a variety of applications ranging from repair to high speed producti...

Thermally Conductive, Two Component Epoxy Passes USP Class VI Tests and ISO 10993-5 Specifications

With biocompatibility and cytotoxicity certifications, Master Bond EP21AOLV-2Med is often selected for bond...

One Component, Snap Cure Epoxy Features High Strength Properties

Suitable for a variety of applications in the electronic, aerospace and OEM industries, Master Bond EP3SP5F...

One Part Epoxy Resists up to 500°F and Meets NASA Low Outgassing Specifications

Master Bond Supreme 12AOHT-LO is a one component epoxy for a variety of bonding and sealing applications in...

VICTORY Shared Processing, Fire Control Computer, and Switch for Ground Vehicles Introduced by Curtiss-Wright

Curtiss-Wright Corporation today announced that its Defense Solutions division has introduced a new fully i...


Curtiss-Wright Corporation’s Defense Solutions division applauds Northrop Grumman Corporation (NYSE: NOC) o...

Curtiss-Wright’s New Rugged Mobile IP Router Subsystem Features an Integrated Cisco® 5915 ESR Router

Curtiss-Wright Corporation today announced that its Defense Solutions division, a Cisco® Systems Solution T...

GE Announces First Sub-Credit Card-Sized Multi-Function High Definition (HD) Video Tracker

HUNTSVILLE, AL.— OCTOBER 13, 2014—GE’s Intelligent Platforms business today announced at AUSA (October 13-...


Meeting the Gen3 backplane challenge with OpenVPX and COTS

Tight Pentagon budgets mean military systems must stay in the field for longer than ever before. This doesn't mean obsolete technology, however. Today's military electronics are being upgraded constantly, an...
Sponsored by:

Design Strategy Considerations for DO-178C Certified Multi-core Systems

Join Wind River to learn how system architecture and design choices can minimize your DO-178C certification challenges.

Sponsored by:

Flying, Sailing or Driving - The Rugged, Embedded Intel-based Server that goes where you need it!Flying Sailing or Driving

Leveraging the power of server-class processors is no longer relegated to the confines of data centers. Through several innovations, Mercury Systems has ruggedized Intel’s server-class chips for deployment. ...
Sponsored by:

All Access Sponsors

Mil & Aero Magazine

April 2015
Volume 26, Issue 4

Download Our Apps




Follow Us On...


Military & Aerospace Electronics

Weekly newsletter covering technical content, breaking news and product information

Cyber Security

Monthly newsletter covering cyber warfare, cyber security, information warfare, and information security technologies, products, contracts, and procurement opportunities

Defense Executive

Monthly newsletter covering business news and strategic insights for executive managers

Electronic Warfare

Quarterly newsletter covering technologies and applications in electronic warfare, cyber warfare, optical warfare, and spectrum warfare.

Embedded Computing Report

Monthly newsletter covering news on embedded computing in aerospace, defense and industrial-rugged applications

Unmanned Vehicles

Monthly newsletter covering news updates for designers of unmanned vehicles