Laser weapons take aim at the tactical level

The latest generations of laser weapons research seek to move beyond gigantic platforms like the Boeing 747 jumbo jet, and create deployable weapons that could be reliably mounted to small ships, fighter aircraft, armored combat vehicles, and even unmanned vehicles.

A new generation of laser weapons may be on the horizon that is small enough and with sufficient power to fit on jet fighters, unmanned vehicles, armored combat vehicles, and small military boats to carry out tasks like defending against cruise missiles and swarms of small boats, providing air defenses for combat and cargo aircraft, ground attack, and defending against incoming artillery shells, rockets, and mortars.

The most important aspects of these future generations of laser weapons are size, weight, and power. They must be sufficiently small and efficient enough to fit on relatively small vehicles, while the most advanced laser weapon prototypes today—such as the U.S. Airborne Laser (ABL) system—must be housed on platforms as large as a modified Boeing 747 jumbo jet.

An engineer monitors a solid-state laser at Northrop Grumman’s Directed Energy Production Facility.

The enabling technologies at the heart of these advances involve advanced chemical lasers, as well as new developments in solid-state lasers and fiber-optic lasers. Additional, newer technologies ultimately may come into play before these new prototype laser weapons are ready for widespread deployment, but for today, solid-state and fiber-optic laser technology are the best bets for future generations of tactical laser weapons.

The reasons for today’s optimism for advanced chemical, solid-state, and fiber-optic laser technology revolve around three high-profile research projects. The first two research projects—the Joint High Power Solid State Laser (JHPSSL) program and the High Energy Liquid Laser Area Defense System (HELLADS)—have largely been completed. The other program, the Robust Electric Laser Initiative (RELI), is a follow-on project intended to capitalize on technologies developed in JHPSSL and HELLADS.

The JHPSSL and HELLADS projects have developed impressive technologies that hold out promise for lending themselves to the kinds of packaging, cooling, and fire-control capability that experts say would be suitable for future laser weapons. The RELI program seeks drastic improvements in laser efficiencies, as well as in packaging small enough for tactical aircraft and vehicles—and could be the project that yields the technological breakthroughs that might lead to deployable laser weapons.

The JHPSSL program aimed to produce a laboratory-based, 100-kilowatt laser prototype, while HELLADS concentrated on developing 150-kilowatt laser technology. Supervising the JHPSSL program has been the High Energy Laser Joint Technology Office in Albuquerque, N.M., as well as the U.S. Army. HELLADS is sponsored by the U.S. Defense Advanced Research Projects Agency in Arlington, Va.

Plenty of obstacles must be overcome, however, before tactical laser weapons can become a reality. The military services, for example, first must demonstrate sufficient interest in laser weapons to formulate detailed requirements and find the funding necessary to bring them to deployment. High-energy laser designers, moreover, must settle on the laser technologies with the best potential for weapons and see research projects through, rather than flitting continually to the next big thing.

An engineer adjusts a fiber amplifier developed in the JHPSSL program in a company high-energy laser laboratory.

The JHPSSL program

Although the JHPSSL program itself has concluded, the technology the program has yielded is leading to new research efforts that may pave the way to deployment of tactical laser weapons. The U.S. companies involved in the latest phase of JHPSSL were the Northrop Grumman Corp. Aerospace Systems segment in Redondo Beach, Calif., and Textron Defense Systems in Wilmington, Mass.

Textron’s technology entry in the JHPSSL program is called THINZAG, which describes a thin laser gain material measuring one foot long by two inches high with good heat transfer to the material’s edge, as well as a zig-zag pattern of optical windows through the material, explains Rob Gregory, director of laser systems at Textron Defense Systems.

“The architecture allows us to scale in power,” Gregory says. “We have three knobs to turn. The first knob increases the surface area of the gain medium. The second knob involves putting slabs together with thin channels for coolant, like a sandwich. By adding more slabs to the sandwich, we can increase power. The third knob is to pump harder with the diode array pump medium by pumping harder with more diodes.”

This approach, with three scaling axes, offers more efficient heat extraction than is typical for slab-type solid-state lasers, and enables Textron laser researchers to scale up to very high power while maintaining good optical quality, Gregory says. “The challenge in solid-state lasers is extracting heat,” he says. “Everything not coming out of the laser is heat that needs to be removed.”

In Textron’s THINZAG architecture, engineers use fiber lasers to establish the initial laser beam, and then move to the THINZAG material to scale up the power of the fiber by progressively amplifying the laser, he says. Textron began participating in the third phase of JHPSSL about seven years ago, and reached a laser output power of 100 kilowatts in January 2010.

This artist’s concept depicts a solid-state laser weapon integrated onto a Navy destroyer. The beam director is shown on the ship’s surface, while the actual laser would be housed below deck. (Northrop Grumman image)

The JHPSSL program imposed several demanding parameters on its contractors that would define and lead to development of a militarily useful laser weapon, explains Dan Wildt, vice president of directed energy systems at Northrop Grumman Aerospace.

“We had to demonstrate a laser that could turn off and on in less than a second and we demonstrated six-tenths of a second,” Wildt says. “We demonstrated 19 percent efficiency. It had to have good beam quality, which is really a measure of the ability to focus the beam on the target at long range. It had to have a long run time, and our laser was designed to run as long as you provide power and cooling to the system. We demonstrated 10 minutes, which is very, very long for a laser."

Over the development cycle of Northrop Grumman’s JHPSSL laser, company experts logged a total of more than six hours of operation at 100 kilowatts. Northrop Grumman’s JHPSSL approach also uses optical slabs, which Wildt describes as “about the size of microscope slide. It is within that material that we generated the laser beam.”

Overall, the JHPSSL program in its three phases demonstrated a feasible 100-kilowatt, solid-state laser of military significance with “reasonable beam quality and good efficiency,” says Mark Neice, director of the High Energy Laser Joint Technology Office. “Reasonable beam quality is considered to be 1.5 times the diffraction limit, and we had a goal of two times the diffraction limit,” he says. We did not hit our goal, but we are close enough to move forward.”

To wrap up work completed in JHPSSL, officials of the High Energy Laser Joint Technology Office will continue funding Textron’s work in the laboratory to fine-tune the company’s technology, and will move the Northrop Grumman JHPSSL technology to the High Energy Laser Test Facility at White Sands, N.M., for field demonstration. “Northrop Grumman is transitioning from the lab to a field test environment, and we may transition the Textron laser to field tests, as well,” Neice says.

The HELLADS program

The DARPA High Energy Liquid Laser Area Defense System, or HELLADS, program took a chemical laser approach and aimed at demonstrating a 150-kilowatt laser—or 50 percent higher power than JHPSSL. Its contractors are General Atomics Aeronautical Systems Inc. in San Diego and Textron Defense Systems—the same company involved in JHPSSL.

HELLADS has been in the works since 2003, and at this stage seeks to build and ground-test a 150 kilowatt laser that weighs about 1,650 pounds early next year. If it works, the result not only would be a power-to-weight ratio 10 times better than existing laser systems, but also could mean the next step in giving the U.S. a fleet of laser-blasting aircraft,” says Michael Perry, vice president of the General Atomics Laser and Electro-Optics (LEO) business unit.

Northrop Grumman produced a laser weapon system demonstrator for the Joint High Power Solid State Laser program, Phase 3.

In developing the HELLADS prototype, one of the biggest challenges involved balancing output power with the needs for a laser pump system, laser power supply, and ability to cool the laser by removing waste heat. “Eighty percent of your size and weight is taken up with the diode pump system, power supply, and thermal management," Perry explains.

General Atomics calls its technological approach to HELLADS a distributed-gain liquid laser. “It is inherently a combination of a solid-state and a liquid laser. It has attributes of a solid-state laser combined with the efficient cooling of a liquid laser. Liquid is an integral part of the laser itself, and also is the coolant,” Perry explains.

“We are developing a compact power system, compact thermal storage, and other ancillary packaging we need for the system, as well as lightweight beam control,” Perry says. General Atomics completed a prototype power system and heat-removal system last year.

Northrop Grumman engineers developed the Tactical High-Energy Laser (THEL).

One approach to enhancing the laser’s efficiency involved reducing the number of diodes in the laser’s pump system to reduce the overall size of the laser. “We finished a prototype of an actual system, and the program is going to the next phase,” Perry says, which is to start building the full 150-kilowatt laser system. After that, DARPA will compete a contract to integrate the General Atomics laser into a prototype laser weapon system, says Richard Bagnell, the HELLADS program manager at DARPA.

Looking to the future

So, where tactical laser weapons development stands now is an established variety of technologies improving on parallel paths, yet still without an obvious front runner. The next step, which has the potential to winnow down some of the competing laser weapons technologies, is the Robust Electric Laser Initiative, better-known as RELI.

“RELI builds on successes of JHPSSL,” Neice explains. Rather than setting individual performance parameters, as was done in JHPSSL, the RELI program will concentrate on only one primary metric called “power in the bucket effectiveness,” which measures the number of photons that are delivered in a representative laser beam size, he says. Essentially, this new metric combines benchmarks for power output, beam quality, and photons.

One interesting aspect of the RELI program is its target laser power: 25 kilowatts, as opposed to 100 kilowatts for JHPSSL and 150 kilowatts for HELLADS. “The reason we are moving back to 25 kilowatts is we want to see a vast improvement in overall system efficiency of the laser architectures,” Neice explains.

“In layman’s terms, JHPSSL demonstrated 100 kilowatts at less than 20 percent system efficiency, so it takes 500 kilowatts of power in to get 100 kilowatts of photons out,” Neice says. “The new goal is to drive efficiency up to about 35 percent by simplifying the cooling and thermal management. This phase also reduces the power input and power storage requirements.”

The RELI program started last summer is now moving through its risk-reduction phase, Neice says. “We expect within the next 12 months to review the progress of individual contractors, and will be awarding contracts for build-out of 25 kilowatt devices to be demonstrated in 2014.”

The Office of Naval Research disables a small target vessel using a solid-state, high-energy laser developed by Northrop Grumman mounted onto the deck of the Navy’s self-defense test ship, former USS Paul Foster (DD 964). (U.S. Navy Photo)

In addition to JHPSSL contractors Northrop Grumman Aerospace and Textron Defense Systems, the RELI program also will include Raytheon Space Systems in El Segundo, Calif.; the Boeing Directed Energy Program in Albuquerque, N.M.; and Aculight Laser Solutions, a Lockheed Martin company in Bothell, Wash., Neice explains.

The first phase of the RELI program will culminate in 2014, “and then we can make decisions to push up to 100 kilowatts, based on the needs of the military services,” Neice says.

Partners on the RELI program are the U.S. Army and U.S. Air Force. Neice anticipates the U.S. Navy will become involved in the program sometime next year.

More Military & Aerospace Electronics Current Issue Articles
More Military & Aerospace Electronics Archives Issue Articles

Get All the Military Aerospace Electronics News Delivered to Your Inbox or Your Mailbox

Subscribe to Military Aerospace Electronics Magazine or email newsletter today at no cost and receive the latest information on:

  • C4ISR
  • Cyber Security
  • Embedded Computing
  • Unmanned Vehicles

Get All the Military Aerospace Electronics News Delivered to Your Inbox or Your Mailbox

Subscribe to Military Aerospace Electronics Magazine or email newsletter today at no cost and receive the latest information on:

  • C4ISR
  • Cyber Security
  • Embedded Computing
  • Unmanned Vehicles

Military & Aerospace Photos

Most Popular Articles

Related Products

XPedite7470 | Intel® Core™ i7 Processor-Based Conduction- or Air-Cooled 3U VPX-REDI SBC

The XPedite7470 is a high-performance, low-power, 3U VPX-REDI, single board computer based on the...

XPedite2470 | 3U VPX Xilinx Virtex-7 FPGA Module with FMC Site and Freescale P1010 Processor

The XPedite2470 is a high-performance, reconfigurable, conduction- or air-cooled, 3U VPX, FPGA pr...

XPedite5205 | Embedded Services Router (ESR) with Cisco IOS® on an XMC/PMC Module

The XPedite5205 XMC/PMC-based Embedded Services Router (ESR) router runs Cisco IOS® Software with...


Suitable for large castings, EP21LVSP6 is a room temperature curing system with a long open time ...


Master Bond UV25 offers exceptional thermal stability over the broad service temperature range of...

LED401: High Performance LED Curable Compound

Master Bond LED401 is a unique single component compound that cures rapidly upon exposure to 405 ...

EP46HT-1AO: Glass Transition Temperature Over 215°C

With impressive thermal conductivity and electrical insulation properties, EP46HT-1AO is a two co...

Super Gel 9AO

Featuring resounding softness and dimensional stability, Super Gel 9AO is a two component system ...


Flame retardant EP90FR-HFL is a toughened epoxy that passes FAR standard 14 CFR 25.853(a). Theref...

KI 9600 Series Pocket Fiber Meter

The KI 9600 Pocket Fiber Meter is a simple and reliable power meter for testing power and loss on...

Related Companies


ORIENTIR specializes in producing high-precision IR optical components for the medical and life sciences, defense and...

GiGa Concept Inc

Manufactures patented fiber-optic mode control using multimode fibers from 50/125 to 400/440 Patented fiber-optic po...

Master Bond

For over 35 years, Master Bond has been supplying aerospace and defense manufacturers with custom formulated compound...

United Electronic Industries Inc

UEI is a leader in the PC/Ethernet data acquisition and control, Data Logger/Recorder and Programmable Automation Con...

Advanced Conversion Technology Inc

ACT designs and manufactures, since 1981, an extensive range of AC-DC and DC-DC power supplies (switching, linear, ra...

Martin, Froeschner & Associates

The ultimate in velocity measurement, the Mark IV-3000 all-Fiber Doppler Velocity Interferometer (VISAR) never needs ...

Electro-Mech Components Inc

Designs and manufactures push button illuminated switches, indicator lights, and multi-switch interlocking assemblies...

Avo Photonics

Designs, develops, and manufactures confidential, client-owned opto-electronic solutions for medical, industrial, com...

Electronic Development Labs Inc (EDL)

Since 1943, EDL has strived to provide quality products, outstanding customer service, and superior technical support...

aPeak Inc

APeak Inc develops and markets sensor arrays with single-photon sensitivity and custom detection technologies for sci...
Wire News provided by   

Press Releases


Curtiss-Wright Corporation today announced that its Defense Solutions division has received a contract from Sierra Nevada Corporation (SNC) to supply its small form factor ...

Innovative Integration Announces the FMC-Servo

Camarillo, CA June 19, 2015, Innovative Integration, a trusted supplier of signal processing and data acquisition hardware and software solutions, today announced the FMC-S...


Curtiss-Wright Corporation today announced that its Defense Solutions division has further enhanced its innovative VRD1 high definition (HD) video management system (VMS) w...


Harsh Environment Protection for Advanced Electronics and Components

This webinar will offer an opportunity to learn more about ultra-thin Parylene conformal coatings – how they are applied, applications they protect today, and the properties and benefits they offer, includin...

New Design Tools That Help You Develop Radar That Sees the Un-seeable and Detects the Undetectable

Xilinx EW/ISR System Architect, Luke Miller, has new tricks and he’s going to tell you all about them in a new Xilinx Webinar—for free. His Webinar will cover new ways to implement Radar functions including ...
Sponsored by:

Latest from the Paris Air Show

All Access Sponsors

Mil & Aero Magazine

June 2015
Volume 26, Issue 6

Download Our Apps




Follow Us On...


Military & Aerospace Electronics

Weekly newsletter covering technical content, breaking news and product information

Cyber Security

Monthly newsletter covering cyber warfare, cyber security, information warfare, and information security technologies, products, contracts, and procurement opportunities

Defense Executive

Monthly newsletter covering business news and strategic insights for executive managers

Electronic Warfare

Quarterly newsletter covering technologies and applications in electronic warfare, cyber warfare, optical warfare, and spectrum warfare.

Embedded Computing Report

Monthly newsletter covering news on embedded computing in aerospace, defense and industrial-rugged applications

Unmanned Vehicles

Monthly newsletter covering news updates for designers of unmanned vehicles