HIGH-RELIABILITY ELECTRONICS

Rugged electronics that must operate in harsh conditions involving extremes in temperature, shock, vibration, moisture, dust, and dirt

Related Products

PC/104 SBC and Peripherals

Kontron PC/104 Standalone Single Board Computers (SBCs) serve in every format, even with consistent product families that allow full accessory and chassis re-use.

General Micro "Horizon" C299

The C299 Horizon is a third generation, 6U cPCI SBC module based on GMS’ upgradable CPU technology. It is designed to provide the highest level of workstation performance possible in a fully ruggedized dual slot (8HP) cPCI. The Horizon is targeted for applications where ultra-high-speed processing power is required with

Rugged Mobile Communications Server

Advanced communications server designed to be deployed in environments where it needs to meet certain shock, vibe, and temp extremes. Available in several configurations.

API DC Link Power Film Capacitors

High reliability DC link capacitors for power inverter applications which require superior life expectancy under harsh operating conditions of wind and photovoltaic installations.

VPX3-453 3U VPX Virtex-6/8640D Digital Signal Processor

The Curtiss-Wright VPX3-453 is a high performance 3U VPX DSP and FPGA processor card that combines a Xilinx Virtex-6 FPGA and a Freescale Power Architecture MPC8640D processor.

Silicones

Master Bond’s silicones are available in both one part and two part versions that offer the advantageous combination of high temperature resistance and superior flexibility. Our single component systems make processing simple with fast cures at room temperature based on atmospheric humidity. They eliminate complicated mix ratios and bond well

Light Curing Systems

Master Bond offers a large family of light curing products that cure upon exposure to a UV or LED light source. UV systems are environmentally friendly and do not include any solvents or diluents. As one part formulations, they offer the convenience of no mixing and easy processing to speed

Epoxies

Master Bond offers an extensive range of one and two part epoxies for a variety of applications and industries. Two part epoxies are composed of a resin and a hardener and most systems are designed to cure at room temperature or more quickly at elevated temperatures. Master Bond keeps its

The F-Series Computing Platform

The F-Series Computing Platform combines the reliability of PCIe/ 104 with a flexible approach to rugged packaging. With an Intel Corei7 processor at its foundation, the F-Series is expandable both in terms of I/O options and overall system size for optimal performance while meeting SWaP requirements in a wide variety

Electronic Warfare VPX Products

The VPX product line includes three products: Modular Quad IF Up and Down Converter, Modular Direct Synthesizer and the Modular Seven Channel Indirect Synthesizer. These offerings provide critical functionality for processing of rapidly evolving Electronic Warfare signals. Low spurious and noise performance, as well as an exceptionally small physical implementation

Interpoint™ MTR Series™ 50 Volt

The MTR Series™ MTR 50, 28 volt dc-dc converter offers up to 30 watts of output power from single or dual output configurations. They operate over the full military temperature range of -55°C to +125°C with up to 84% efficiency. MTR 50 converters are packaged in hermetically sealed metal enclosures,

Interpoint™ MFP Series™ Down-Leaded Point of Load

The new down-leaded version of its Interpoint™ MFP Series Point of Load (POL) converters are available in both flanged and non-flanged packages, is a single output 16 watt dc-dc converter providing output voltages from 0.8 to 3.5 V from a source voltage of 3 to 6V with up to 90%

CRS-D4I-3VB1 4-slot SWaP reduced, rugged VPX data processing & computer system

The CRS-D4I-3VB1 rugged system is a 4-slot, SWaP reduced, rugged VPX data processing and control computer system with an Intel-based processor single board computer that provides a rugged and highly flexible computing platform suited for applications requiring rock-solid reliability such as civilian and military UAVs, manned commercial and military aircraft,

API Technolgies Mini-MIL Connectors

A small, lightweight circular connector that offers space and weight savings with performance equivalent to MIL-DTL-38999 for rugged applications that require high performance EMI filtering.

Hermetically-Sealed Custom Circular Connectors

API Technologies’ Spectrum Control line offers a new family of hermetically sealed circular connectors for aerospace applications with high differential pressure. These connectors meet MIL-DTL-38999 fine leak requirements and are ideal for aerospace engine control, hydraulic, and caustic environments where harsh conditions exist. Available EMI filtered or unfiltered, with a

XPand6206 Rugged Small Form Factor (SFF) COTS 20-Port Gigabit Ethernet Switch and Router with Cisco® IOS™

The XPand6206 is a Commercial-Off-The-Shelf (COTS) Rugged 20-Port Gigabit Ethernet switch and router that maximizes performance while minimizing SWaP. With a compact design and weighing less than nine pounds, the XPand6206 is the smallest available, truly rugged, Ethernet switch to support this amount of networking performance and functionality.

General Micro "Atom" XPC40X Rugged, Ultra-Small, Ultra-Low-Power Intel Atom™ CPU SBC

The XPC40X Atom is a rugged, low cost, ultra-low power, lightweight, Atom™ based computer system. It is designed to provide the lowest power consumption possible in a fully ruggedized, air or conduction cooled module, operating over a full -40°C to +85°C. The Atom is targeted for applications where an ultra-low

General Micro's VS295 Eclipse

The VS295 Eclipse is fifth generation, VME SBC module based on GMS, upgradable CPU technology. It is designed to provide the highest level of workstation performance possible in a fully ruggedized single slot VME slot. It may be operated in all VME backplanes with 3 row or 5 row VME

IBX400 6U OpenVPX InfiniBand® Switch Fabric Module

The IBX400 is the world's first, fully rugged, 6U OpenVPX InfiniBand® switch fabric module (SFM) bringing data center connectivity and performance to deployed defense and aerospace applications, further enhancing GE's broad offering for High Performance Embedded Computing (HPEC). The IBX400 complements GE's GBX460 10 Gigabit Ethernet Switch Fabric Module offering

XVR16 6U 4th Generation Intel Core i7 Based Rugged VME Single Board Computer

The XVR16 Rugged 6U VME Single Board Computer (SBC) from GE Intelligent Platforms features the high performance, highly integrated 4th Generation Core i7 processor platform from Intel.

4th Generation Core i7 technology offers integrated graphics and memory controller plus quad-core processing up to 2.5 GHz all in one device.

PMC-E2001 Audio/Acoustic Waveform Generating PMC Card

PMC-E2001 Delta-sigma PMC features 16-bit resolution with 8 Analog Outputs and 4 Analog Inputs with performance rated at 92dB (typ) DAC SFDR and 90dB (typ) ADC SFDR.

CHAMP-FX4 6U OpenVPX Virtex-7 FPGA Processor Card

The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Controls Defense Solutions’ family of user-programmable Xilinx® Virtex®-7 FPGA-based computing products, designed to meet the needs of challenging embedded high-performance digital signal and image processing applications. Curtiss-Wright's 4th generation 6U FPGA card, the CHAMP-FX4 combines the dense processing resources of three

SBC326 - 3U OpenVPX 4th Generation Intel Core i7 based Single Board Computer

The SBC326 Rugged Single Board Computer (SBC) from GE Intelligent Platforms features the high performance, highly integrated 4th Generation Core i7 processor platform from Intel.

4th Generation Core i7 with fully integrated graphics and memory controller plus quad core processing at 2.4 GHz offers better performance per watt -

XCalibur4530 4th generation Intel Core i7 processor-based 6U VME module

The XCalibur4530 is a high-performance 6U VME single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the 4th generation Intel® Core™ i7 Haswell processor, the XCalibur4530 delivers enhanced performance and efficiency for today's network information processing and embedded computing applications.

XPedite7570 4th generation Intel Core i7 Haswell processor-based 3U VPX module

The XPedite7570 is a high-performance, low-power, 3U VPX-REDI, single board computer based on the 4th generation Intel® Core™ i7 Haswell processor. With two PCI Express Fat Pipe P1 interconnects and four Gigabit Ethernet ports, the XPedite7570 is ideal for the high-bandwidth data processing demands of today's military and avionics applications.

All Access Sponsors


Mil & Aero Magazine

April 2014
Volume 25, Issue 4
file

Download Our Apps



iPhone

iPad

Android

Connect With Us



Newsletters

Military & Aerospace Electronics

Weekly newsletter covering technical content, breaking news and product information
SUBSCRIBE

Defense Executive

Monthly newsletter covering business news and strategic insights for executive managers
SUBSCRIBE

Embedded Computing Report

Monthly newsletter covering news on embedded computing in aerospace, defense and industrial-rugged applications
SUBSCRIBE

Unmanned Vehicles

Monthly newsletter covering news updates for designers of unmanned vehicles
SUBSCRIBE