Bulk front-end AC-DC power supply in 1U-by-2U form factor introduced by Emerson for computing and networking

CARLSBAD, Calif., 30 July 2010. Emerson Network Power in Carlsbad, Calif., is introducing the DS460S-3 bulk front-end AC-DC power supply for applications that use distributed power architectures, such as computing, storage, networking, data communications, as well as test and measurement. The DS460S-3 is 92 percent at 50 percent full load. With a 1U-by-2U form factor and 7.75 inches long, the DS460S-3 is for length-limited applications and mid-plane design configurations and, at a height of 1.6 inches is for use in 1U rack-mounting equipment.

Jul 30th, 2010
Pennwell web 120 76

CARLSBAD, Calif., 30 July 2010. Emerson Network Power in Carlsbad, Calif., is introducing the DS460S-3 bulk front-end AC-DC power supply for applications that use distributed power architectures, such as computers, data storage, networking, data communications, as well as test and measurement.

The DS460S-3 power supply is 92 percent at 50 percent full load. With a 1U-by-2U form factor and 7.75 inches long, the DS460S-3 is for length-limited applications and mid-plane design configurations and, at a height of 1.6 inches is for use in 1U rack-mounting equipment.

Rated at 460 Watts, the DS460S-3 power supply generates a main payload output of 12 volts DC and an auxiliary output of 12 volts DC for powering standby circuitry. It features an input voltage of 90 to 264 volts AC. and uses active power factor correction to minimize input harmonic current distortion and to comply with the international EN61000-3-2 standard, with a power factor of 0.99 typical.

Digitally programmable, the DS460S-3 is equipped with an I2C interface available with industry-standard PMBus communications protocol. The DS460S-3 also features a built-in low noise smart fan and holds safety certifications from UL/cUL, NEMKO, CB, and CE. For more information contact Emerson Network Power online at www.powerconversion.com.

More in Power