Army reaches out to industry for mature vehicle-mount IED detection and marking capabilities

July 23, 2015
FORT BELVOIR, Va., 23 July 2015. U.S. Army researchers are reaching out to industry for fresh IED detection ideas on mature technologies for clearing surface-laid and buried improvised explosive devices (IEDs) from roadways and areas of military operations.
FORT BELVOIR, Va., 23 July 2015. U.S. Army researchers are reaching out to industry for fresh IED detection ideas on mature technologies for clearing surface-laid and buried improvised explosive devices (IEDs) from roadways and areas of military operations.

Officials of the Fort Belvoir, Va., segment of the Army's Aberdeen Proving Ground issued a solicitation Wednesday (W909MY-15-R-F011) for the Route and Area Clearance for Explosive Hazards project. Proposed technologies must be at least at a laboratory prototype stage.

The Army Contracting Command is issuing the solicitation on behalf of the Army Product Manager for Counter Explosive Hazard (PdM CEH). Researchers are interested in IED-detection approaches that are airborne, vehicle-based forward-looking, vehicle-based downward-looking, and combinations of these modes.

Army experts particularly are interested in technologies that can detect IEDs quickly to support high rates of advance along routes. advance along routes.

The intent is to mount IED-detection capabilities to the Husky Mark III vehicle, the Medium Mine Protected Vehicle (MMPV) Type II, the Buffalo/Mine Protected Clearance Vehicle (MPCV) A2, and the RQ 20 PUMA unmanned aerial vehicle (UAV).

Related: IED hunters adapt to sophisticated threats

Proposed solutions should have the ability to detect surface-laid and shallow-buried, metallic, low-metallic, and non-metallic explosives in a wide range of road surfaces and soil conditions. The probability of detection shall be 95 percent or greater for surface-laid explosive hazards, to include antitank land mines, IED's, unexploded ordnance, and pressure activated trigger mechanisms.

The probability of detection of explosives buried as deep as eight inches should be 90 percent or greater for the same kinds of explosive hazards. Proposed solutions also should be able to mark deep-buried metallic, low-metallic, and non-metallic IEDs. The probability of detection should be 85 percent or greater for IEDs and caches buried as deeply as four feet.

Companies interested should email responses no later than 29 July 2015 to the Army's Brendan DeLuca at [email protected]. For questions or concerns contact DeLuca by email or by phone at 703-704-0816.

More information is online at https://www.fbo.gov/notices/8f1e4286b83a9b2e138851e8cf71d247.

About the Author

John Keller | Editor

John Keller is editor-in-chief of Military & Aerospace Electronics magazine, which provides extensive coverage and analysis of enabling electronic and optoelectronic technologies in military, space, and commercial aviation applications. A member of the Military & Aerospace Electronics staff since the magazine's founding in 1989, Mr. Keller took over as chief editor in 1995.

Voice your opinion!

To join the conversation, and become an exclusive member of Military Aerospace, create an account today!