Master Bond introduces two-part epoxy adhesive for aerospace and electronics uses
HACKENSACK, N.J., 7 Jan. 2016. Master Bond Inc. in Hackensack, N.J., is introducing the Supreme 11HTLP two-part epoxy adhesive to bond a wide variety of substrates, including metals, glass, ceramics, composites, rubbers and plastics in aerospace, electronics and specialty OEM applications.
HACKENSACK, N.J., 7 Jan. 2016.Master Bond Inc. in Hackensack, N.J., is introducing the Supreme 11HTLP two-part epoxy adhesive to bond a wide variety of substrates, including metals, glass, ceramics, composites, rubbers and plastics in aerospace, electronics and specialty OEM applications.
The adhesive combines user friendly processing with a high physical strength profile. Supreme 11HTLP is formulated to have impressive toughness, which imparts high bond strength of over 3,200 psi and 20 pli, respectively in the shear and peel mode.
This compound's toughness also enables it to withstand aggressive thermal cycling as well as impact and shock. It is serviceable over a temperature range of -100 to 400 degrees Fahrenheit.
Supreme 11HTLP has a one to one mix ratio by weight or volume along with a working life of 90-120 minutes for a 100 gram batch. Thorough mixing is facilitated by color coding as Part A is gray and Part B is amber. It has a high viscosity, but maintains flow properties.
This system can be cured at room temperature or more rapidly at elevated temperatures. Upon curing, Supreme 11HTLP exhibits low shrinkage and dimensional stability. Additionally, it is readily machinable.
Featuring a volume resistivity exceeding 1013 ohm-cm, Supreme 11HTLP delivers reliable electrical insulation values. Resistance many chemicals, including water, oil and fuels is excellent. 100 percent reactive, this adhesive/sealant is available for use in 1/2 pint, pint, quart, gallon, and 5 gallon container kits.
For more information contact Master Bond online at www.masterbond.com.