DC-DC converters that offer five Watts of regulated power electronics output introduced by ConTech

CONCORD, Calif., 7 Oct. 2010. ConTech in Concord, Calif., is introducing the SMW series of DC-DC converters that offers five Watts of regulated output power with an industry standard SMT footprint. Total board space required for this package is 1.31 by 1.01 by-.4 inches. The series offers a 4:1 input range with nominal input voltages of 24 and 48 volts DC. Single outputs offered are 3.3, 5, 12, and 15 volts DC. Dual outputs are +/-5, +/-12, and +/-15 volts DC.

Pennwell web 120 90

CONCORD, Calif., 7 Oct. 2010. ConTech in Concord, Calif., is introducing the SMW series of DC-DC converters that offers five Watts of regulated output power with an industry standard SMT footprint. Total board space required for this power electronics package is 1.31 by 1.01 by-.4 inches. The series offers a 4:1 input range with nominal input voltages of 24 and 48 volts DC. Single outputs offered are 3.3, 5, 12, and 15 volts DC. Dual outputs are +/-5, +/-12, and +/-15 volts DC.

The operating ambient temperature range of the SMW is -40 to 71 degrees Celsius. The units are encapsulated with a thermally conductive potting compound in a non-conductive plastic case. The series is isolated input to output with an isolation voltage rating of 1500 volts DC. The case is designed to withstand most solder/wash processes. The SMW series has a Remote On/Off have which when used has a standby current of 10 milliamps. The SMW series is CSA 60950 approved and RoHS compliant.

For more information contact ConTech online at www.contech-us.com.

More in Power