AC-DC power modules for fanless COTS, industrial, and communications introduced by TDK Lambda

SAN DIEGO, 29 June 2016. TDK-Lambda Americas Inc. in San Diego is introducing the TDK-Lambda PFE1000FA series of AC-DC power modules for outdoor and liquid-cooled power systems in fanless COTS, industrial, signage, and communications applications.

Jun 29th, 2016
By Mil & Aero staff
By Mil & Aero staff

SAN DIEGO, 29 June 2016. TDK-Lambda Americas Inc. in San Diego is introducing the TDK-Lambda PFE1000FA series of AC-DC power modules for outdoor and liquid-cooled power systems in fanless industrial, COTS, signage, and communications power electronics applications.

The series achieves as much as a 4 percent efficiency improvement over the company's PFE1000F series, The devices enable designers to use one device with power factor correction, regulation, and input-output isolation.

Operating from a universal input of 85 to 265 volts AC, the PFE1000FA models are available with nominal outputs of 12, 28, and 48 volts DC and can be adjusted +/-20 percent via a trim-pin.

All the power modules can deliver full power with an operating baseplate temperature range of -40 to 100 degrees Celsius. An isolated module good signal, remote on/off, 12-volt standby output, over voltage, over current, and over temperature protection is included.

Related: DC-DC converters for servers, routers, test, and measurement introduced by TDK

The package size and pinout is in the same 100-by-13.4-by-160-millimeter format as the original series. The TDK-Lambda PFE1000FA series is certified to the safety standards of UL/CSA/EN 60950-1 and is CE marked according to the Low Voltage and RoHS2 Directives.

For more information contact TDK Lambda online at www.us.tdk-lambda.com.

Learn more: search the Aerospace & Defense Buyer's Guide for companies, new products, press releases, and videos

More in RF/Analog