Non-solder straight and right-angle connectors for coaxial cable introduced by Times Microwave

March 23, 2012
WALLINGFORD, Conn., 23 March 2012. Times Microwave Systems in Wallingford, Conn., is introducing the EZ-400-BM BNC no-solder male (plug) straight connector and EZ-400-BM-RA BNC no-solder, male (plug) right angle connector for MR-400 low-loss coaxial cable for field installations of RF and microwave coaxial cable.

WALLINGFORD, Conn., 23 March 2012. Times Microwave Systems in Wallingford, Conn., is introducing the EZ-400-BM BNC no-solder male (plug) straight connector and EZ-400-BM-RA BNC no-solder, male (plug) right angle connector for MR-400 low-loss coaxial cable for field installations of RF and microwave coaxial cable.

The crimp-style rugged coaxial connectors do not require soldering of the center conductor into the contact, and are compatible with the CST-400 cable prep tool and either the CT-400/300 or HX-4 (with Y1719 dies) crimp tools.

Times Microwave designs high-performance flexible and semi-rigid coaxial cable, connectors, and cable assemblies for RF transmission from HF through microwave frequencies, as well as surge arrestors to protect RF equipment.

For more information contact Times Microwave online at www.timesmicrowave.com.

About the Author

John Keller | Editor

John Keller is editor-in-chief of Military & Aerospace Electronics magazine, which provides extensive coverage and analysis of enabling electronic and optoelectronic technologies in military, space, and commercial aviation applications. A member of the Military & Aerospace Electronics staff since the magazine's founding in 1989, Mr. Keller took over as chief editor in 1995.

Voice your opinion!

To join the conversation, and become an exclusive member of Military Aerospace, create an account today!