VectorNav launches compact dual-antenna, GPS-aided inertial navigation system
ORLANDO, Fla., 13 May 2014.VectorNav TechnologiesSOLOSHOT, a provider of intelligent and high-performance inertial navigation technologies, is introducing the VN-300 Dual Antenna GPS-Aided Inertial Navigation System (GPS/INS) at AUVSI’s Unmanned Systems 2014 in Orlando, Fla.
The company’s follow-on product to the VN-100 IMU/AHRS and VN-200 GPS/INS, the miniature, high-performance VN-300 enables a wider range of applications through the incorporation of GPS compassing techniques, officials say. The VN-300 can be used in a wide variety of industrial and military applications and is well suited for size, weight, power, and cost (SWaP-C)-constrained applications, such as unmanned vehicle systems; antenna, camera, and platform stabilization; heavy machinery monitoring; robotics; and primary or secondary flight navigation.
Incorporating MEMS sensor technology, the VN-300 combines 3-axis accelerometers, 3-axis gyros, 3-axis magnetometers, a barometric pressure sensor, two GPS receivers, and a low-power micro-processor into a rugged aluminum enclosure roughly the size of a matchbox.
When in motion, the VN-300 couples the position and velocity measurements from the onboard GPS receivers with measurements from the onboard inertial sensors to provide position, velocity, and attitude estimates of higher accuracies and with better dynamic performance than a standalone GPS receiver or Attitude Heading Reference System (AHRS), officials say.
“The VN-300 is unique in that it provides a complete, high performance GPS-aided navigation solution under both stationary and moving conditions, all in a miniature and cost-effective package,” says VectorNav President John Brashear. “By addressing some of the most difficult issues users face when trying to integrate an inertial navigation system – high cost; large size, weight and power; unreliable magnetic environments and restrictive operating requirements – the VN-300 will enable an unprecedented number of applications.”
The dual GPS receivers incorporated into the VN-300 also provide the added benefit of accurate True North heading measurements when the sensor is stationary through the use of GPS compassing techniques. The VN-300 is well suited for applications that require a highly accurate inertial navigation solution under both static and dynamic operating conditions, especially in environments with unreliable magnetic heading and good GPS visibility.
The GPS compass feature coupled with the GPS/INS capabilities on the VN-300 enables applications that require high accuracy position, velocity, and attitude measurements under both static and dynamic operating conditions.
The algorithms onboard the VN-300 enable applications to transition between static and dynamic operations without having to collect extended stationary measurements or perform specific dynamic maneuvers in flight for attitude alignment.
The VN-300 incorporates a “True INS Filter” that does not force any requirements on alignment of the sensor to the velocity direction of a platform or specify the orientation of the sensor for initial alignment.
The VN-300 is on display and available for review at VectorNav’s booth #330 at AUVSI in Orlando from May 13-15, 2014.
Courtney Howard | Executive Editor
Courtney, as executive editor, enjoys writing about all things electronics and avionics in PennWell’s burgeoning Aerospace and Defense Group, which encompasses Military & Aerospace Electronics, Avionics Intelligence, the Avionics Europe conference, and much more. She’s also a self-proclaimed social-media maven, mil-aero nerd, and avid avionics geek. Connect with Courtney at [email protected], @coho on Twitter, and on LinkedIn.