Sunshade is a space rated thermal control material for LEO, MEO and GEO orbit. It has unbeatable performance for Solar rejection, electro-static charge dissipation (ESD) and RF transmissibility. Available now in either free film or tape versions.
Sunshade is the world’s best thermal control material with ESD and RF transmissive performance. It is targeted for use on spacecraft and satellite systems operating in LEO, MEO and GEO. Sunshade is now available in free film or tape versions. It is offered commercial off-the-shelf (COTS), is space qualified and flight proven.
DSI SUNSHADE ADVANTAGES
- Delivers high rejection of incident solar heat energy
- RF transparent at frequencies in the L, S, C, X, Ku, K, Ka, and V Bands
- Flexible, extremely light weight and conformable film
- Large Area: up to 2.5 ft x 10 ft
- Allows static charge to bleed off
FUNCTIONAL PROPERTIES
- Solar Reflectance ≥ 82%
- Solar Transmittance ≤ 2%
- External surface provides ESD with sheet resistance of 2.5E5 to 1.0E9 Ohm/square
- Hemispherical emissivity ≥ 0.72 at 300K
- RF insertion loss ≤ 0.8 dB from 1 GHz — 69 GHZ
DSI SUNSHADE APPLICATIONS
- Satellite radomes
- Antenna covers
- Apertures for thermal control and ESD control
THE DSI DIFFERENCE
DSI Sunshade was originally developed in collaboration with satellite system engineers looking for improved thermal control using RF-transmissive materials with added electro-static discharge (ESD) properties. Sunshade’s continuous coating is distinct from patterned grid films in that no metallic materials are used in its construction.
DSI Sunshade comes in sizes up to 2.5 ft x 10 ft. A low emissivity coating on the back surface reduces thermal load into the satellite and balances the stress of the front surface coating. This makes the product easy to roll and unroll, and renders it sufficiently flexible and conformable to enable it to be easily wrapped onto complex shaped radome assemblies.
DSI Sunshade’s tape version allows for easy peel & stick thermal control.
Get started with Sunshade today. Reach out to our team or request a quote.
DSI SUNSHADE ADVANTAGES
- Delivers high rejection of incident solar heat energy
- RF transparent at frequencies in the L, S, C, X, Ku, K, Ka, and V Bands
- Flexible, extremely light weight and conformable film
- Large Area: up to 2.5 ft x 10 ft
- Electrostatic discharge (ESD)
FUNCTIONAL PROPERTIES
- Solar Reflectance ≥ 82%
- Solar Transmittance ≤ 2%
- External surface provides ESD with sheet resistance of 2.5E5 to 1.0E9 Ohm/square
- Hemispherical emissivity ≥ 0.72 at 300K
- RF insertion loss ≤ 0.8 dB from 1 GHz — 69 GHZ
DSI SUNSHADE APPLICATIONS
- Thermal Control
- Satellite radomes
- Antenna covers
Apertures for thermal control and ESD control
TECHNICAL INFORMATION
Traditional multi-layer insulation (MLI) blankets for satellite and spacecraft use consist of a layer of metal coating on a plastic film. Several of these sheets are combined with insulating spacer layers to complete the assembly. This configuration provides highly efficient blocking of solar heat radiation, but the metal coating also absorbs and reflects radio frequencies, thus attenuating the signal and lowering data rates. To address this, a grid pattern is typically laser ablated in the metal film to allow some RF transmission. However, there remains a direct relationship between increased solar heat blocking and reduced data transmission in MLI blankets.
DSI Sunshade coatings are a unique, all dielectric thin film applied to polyimide sheets. They are used in a single ply. The all dielectric construction efficiently reflects solar heat radiation, but is also virtually transparent at radio frequencies below 18 GHz.
