Nov. 16, 2021
Two component, lower viscosity epoxy system featuring superior temperature and chemical resistance especially for repeated sterilization

Key Features

  • Long open time at room temperature
  • Cures at moderately elevated temperatures
  • Superb physical strength profile
  • Passes ISO 10993-5

Request a technical data sheet

Request a safety data sheet

Discuss your application

Master Bond EP62-1HTMed is a two component epoxy system with a long working life at ambient temperature. The mix ratio is a forgiving 100 to 5 by weight. Upon mixing, it is a moderate viscosity system that flows well. The working life of 100 grams is 12-24 hours at room temperature. The cure schedule options are as follows, 60-70 minutes at 176-212°F [80-100°C] or 20-30 minutes at 257°F [125°C]. To obtain optimum properties, post curing at 212-302°F [100-150°C] for 3-5 hours is recommended. The epoxy contains no solvents or diluents and has low shrinkage upon cure.

The system bonds well to a wide variety of substrates such as metals, plastics, rubbers, ceramics and composites. Upon curing with the optimum schedule, EP62-1HTMed excels in combining high temperature resistance along with the ability to withstand repeated sterilization and many aggressive chemicals. It has a high glass transition temperature (see below). EP62-1HTMed is a dependable electrical insulating material. The service temperature range is -60°F to +450°F. The color of Part A is clear and Part B is dark brown. It is well suited for many varied applications pertaining to medical devices especially where repeated sterilization is a significant issue.

Product Advantages

  • Very long working life
  • Good flow properties
  • Versatile curing schedules
  • Highly resistant to aggressive chemicals
  • Capable of withstanding repeated sterilization cycles

Learn More

Request More Information

By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.