Point of load DC-DC converters for industrial embedded applications introduced by Murata Power

MANSFIELD, Mass., 13 Feb. 2011. Murata Power Solutions Inc. in Mansfield, Mass., is introducing the OKL-T/1-W12 Okami series point of load (POL) DC-converters for embedded applications such as servers and wireless equipment, LED signage and power amplifiers, and other data communications and industrial applications.

Feb 13th, 2011
Pennwell web 420 252
MANSFIELD, Mass., 13 Feb. 2011. Murata Power Solutions Inc. in Mansfield, Mass., is introducing the OKL-T/1-W12 Okami series point of load (POL) DC-converters for embedded applications such as servers and wireless equipment, LED signage and power amplifiers, and other data communications and industrial applications.The OKL-T/1-W12 power electronics device provides maximum 1-amp output current with a nominal 12-volt input, while the input range of 2.9 to 14 volts DC, is wider than the previously released 3-amp and 6-amp models. For applications requiring an ultra wide input range and low output current, the 1-amp OKL model also has the same pad layout as the other models in this family.The OKL-T/1-W12 is designed in an inspectable land grid array (iLGA) format package that allows easy access for testing and inspection of the solder joints.

The OKL-T/1-W12 measures 12.4 by 12.4 by 4.57 millimeters. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficiency POL module features programmable output voltage from 0.9 to 5.5 volts DC and on/off control. These converters also include under voltage lock out (UVLO), output short circuit protection, and over-current protections.

These units are designed to meet all standard UL/EN/IEC 60950-1 safety certifications (2nd Edition) and RoHS-6 hazardous substance compliance. For more information contact Murata Power online at www.murata-ps.com.

More in Power