DC-DC converters for power electronics applications like test and measurement introduced by TDK

SAN DIEGO, 25 Oct. 2016. TDK-Lambda Americas Inc. in San Diego is introducing the TDK-Lambda 15-Watt CCG15S series of DC-DC converters for power electronics applications that include test and measurement, telecommunications, process control, and broadcast.

By Mil & Aero staff
By Mil & Aero staff

SAN DIEGO, 25 Oct. 2016. TDK-Lambda Americas Inc. in San Diego is introducing the TDK-Lambda 15-Watt CCG15S series of DC-DC converters for power electronics applications that include test and measurement, telecommunications, process control, and broadcast.

Operating over a 4:1 input range, these products are enclosed in a 1 inch by 1 inch six-sided shielded metal case. The CCG15S is available with 3.3-, 5-, 12-, or 15-volt outputs and can operate from either a 9-to-36-volt DC or 18- to-76-volt DC input.

With operating efficiencies to 88 percent, the CCG15S series will operate in ambient temperatures from -40 to 85 degrees Celsius. All models have a +/-10 percent output trim function, remote on/off, and over-voltage and over-current protection.

The isolated CCG series has an input to output isolation of 1,500 volts DC and 1,000 volts DC input or output to case. Safety certification includes IEC/EN 60950-1, UL/CSA 60950-1 with CE marking for the Low Voltage and RoHS2 Directives.

For more information contact TDK-Lambda Americas online at www.us.tdk-lambda.com.

Learn more: search the Aerospace & Defense Buyer's Guide for companies, new products, press releases, and videos

More in RF/Analog