High-speed embedded computing 3U VPX backplane for mixed payload modules introduced by Elma

FREMONT, Calif., 21 Nov. 2016. Elma Electronic in Fremont, Calif., is introducing a high-speed embedded computing 3U VPX backplane that supports integration of mixed payload modules, including commercial off-the-shelf (COTS) single board computers, switches, and RF payloads for computer architectures used by the DOD's Hardware/Software Convergence Initiative.
Nov. 21, 2016
2 min read

FREMONT, Calif., 21 Nov. 2016. Elma Electronic in Fremont, Calif., is introducing a high-speed embedded computing3U VPX backplane that supports integration of mixed payload modules, including commercial off-the-shelf (COTS) single board computers, switches, and RF payloads for computer architectures used by the DOD's Hardware/Software Convergence Initiative.

This backplane supports high-speed signals on data paths as well as VITA 67.3 connectors compatible with legacy VITA 67.1 and VITA 66.4 RF and optical I/O connectors.

This 3U 12-slot VPX backplane has a radial slot card for timing and synchronization, and includes seven slots that receive radial clock signals (Aux Clk and Ref Clk) driven independently from a radial clock timing card. The remaining five slots receive standard VPX bused Aux_Clk and Ref_Clk signals. The timing card slot also supports a VITA 67.3c connector with 10 SMPM cavities.

The backplane can handle VPX connector data rates through its multiple data plane UTP connections at 10 GBASE-KR data rates and 10 GBase-KR UTP control plane connections.

Related: 3U 3-slot OpenVPX embedded computing backplane for optical or RF uses offered by Elma

The backplane also has four payload slots, each equipped with a combination VITA 67.3c optical and RF connector in the J2 position. The slot two switch supports a VITA 67.3d connector module compatible with a payload module fitted with a VITA 66.4 MT optical ribbon connector or a VITA 67.1 RF coaxial connector.

When equipped with optical interfaces, the VPX architecture enables data rates across the backplane that are faster than copper interconnect. Also included is a 12-cavity, VITA 67.3e connector to support an RF switch card.

The backplane has two additional slots for plug-in power supplies but is also designed with power input threaded studs so either power input method can be used. The backplane can be supplied in a mini ATR style chassis.

For more information contact Elma online at www.elma.com.

Learn more: search the Aerospace & Defense Buyer's Guide for companies, new products, press releases, and videos

Sign up for our eNewsletters
Get the latest news and updates

Voice Your Opinion!

To join the conversation, and become an exclusive member of Military Aerospace, create an account today!