15-Watt power supply for 24-volt DC applications introduced by Murata Power

MANSFIELD, Mass., 18 Dec. 2009. Murata Power Solutions in Mansfield, Mass., is introducing the 15-Watt maximum output power OKI-T/3-W40 series power supply for use with 24-volt DC input range power conversion applications that require a low voltage DC source for field programmable gate arrays (FPGAs) and microprocessors.

Dec 18th, 2009

Posted by John Keller

MANSFIELD, Mass., 18 Dec. 2009. Murata Power Solutions in Mansfield, Mass., is introducing the 15-Watt maximum output power OKI-T/3-W40 series power supply for use with 24-volt DC input range power conversion applications that require a low voltage DC source for field programmable gate arrays (FPGAs) and microprocessors.

The OKI-T/3-W40 series 3-amp output current surface mount DC-DC converter is part of Murata Power's family of Okami non-isolated, DOSA compliant pinout, point-of-load (PoL) power electronics devices.

The 15-Watt maximum output power converter has an input range of 16 to 40 volts DC and a programmable output voltage of 0.75 to 5.5 volts DC. The power management device is able to drive as many as 1,000 microfarad ceramic capacitors.

The OKI-T/3-W40 device has on/off control, over-temperature, over-current, and under-voltage lock out (UVLO) protection. It measures 0.82 by 0.47 by 0.34 inches, and operates in temperatures from -40 ti 85 degrees Celsius.

The device meets standard UL/EN/IEC 60950-1 safety certifications and complies with RoHS-6 lead-free solder regulations. For more information contact Murata Power online at www.murata-ps.com.

Subscribe

Follow me on Twitter

Join the PennWell Aerospace and Defense Media Group on Linkedin at http://bit.ly/9MXl9

Become a fan of Military & Aerospace Electronics on Facebook at http://bit.ly/1VGM0Q

Post your aerospace and defense-related material to the #milaero community on Twitter. Use the #milaero hashtag.

More in Power