FORT COLLINS, Colo. – Advanced Energy Industries Inc. in Fort Collins, Colo., is introducing the Excelsys CS1000 fanless power supply series for vibration-sensitive mission-critical applications like naval and ground-based radar, communications, and test and measurement.
Delivering as much as 1000 Watts with no fans, these power supplies eliminate acoustic noise, vibration and the need for baseplate cooling.
The CS1000 series offers conversion efficiencies of as much as 94 percent, as well as a 24 Watts bias supply voltage of 5 or 12 volts. The power supplies are available with 24-volt or 48-volt single outputs and operate off universal AC input voltage of 90 to 264 volts AC.
The CS1000 series offers system designers features for increased performance, efficiency, and reliability also for applications like industrial test and measurement, industrial machines, automation equipment, printing, telecommunications, and audio equipment.
These power supplies also are for mission-critical medical clinical diagnostic equipment, medical lasers, dialysis equipment, radiological imaging, and clinical chemistry.
The series provides intelligent analog and digital control and monitoring features that work over PMBus like AC fail, global remote/off, output voltage/current control. These power supplies also offer over-voltage, over-current, short circuit, and over-temperature protection.
The CS1000 is available in M and S versions, each with 24- or 48-volt output options, and provides two MOPP 4-kilovolt AC primary to secondary isolation as well as less than 300-microamp leakage current.
The CS1000S carries IEC60950 safety approvals and is also certified for the upcoming IEC62368-1 safety standard for industrial applications.
For more information contact Advanced Energy Industries online at www.advancedenergy.com.
