TDK-Lambda Americas

COMPANY OVERVIEW

About TDK-Lambda Americas

Number of Employees: 300

Contact

405 Essex Rd
Neptune, NJ 07753
United States

http://www.us.tdk-lambda.com/hp

Phone: 732-922-9300

Fax: 732-922-1441

More Info on TDK-Lambda Americas

AC/DC high voltage and high power programmable power supplies. Genesys(TM) series 750W to 15kW. worldwide inputs. High voltage ALE models for capacitor charging from 500 to 30kJ per sec. to 50kV. New PHV Series, Precision High Voltage DC from 125V to 300kV, and 14W to 15kW.

Products

Power electronics - Power supplies

PHV Series

NEW - PHV Series, Precision Programmable AC-DC power. Models from 125V-300kV. Power from 14W-15kW, with High Accuracy, Low Ripple, High Stability outputs. Optional USB, LAN, IEEE...

Power electronics - Power supplies

152A Series

OEM style Charging Supplies, 1-40kV, 0.5-2kJ/sec

Power electronics - Power supplies

303 Series

Ultra high power, compact capacitor chargers, 1-50kV, 20-30kJ/sec

Power electronics - Power supplies

802 Series

Medium power cap charger, 1-50kV, 8kJ/sec

Power electronics - Power supplies

402 Series

Medium power cap chargers, 1-50kV, 4kJ/sec

Articles

Power

Mil-spec power supply for industrial, military, and test and measurement applications offered by TDK Lambda

The TPS4000 series offers isolated AC fail, DC good and dropped phase signals, remote on/off, remote sense, and a 12 volts 0.3 amps standby supply.

Power

Rugged AC-DC power supplies for testing offered by TDK

The AC-DC power supply series is rated at 500 Watts, comes in a 3-by-5-inch package, and is an alternative for low-power cost-sensitive applications.

Power

Rugged industrial power supplies introduced by TDK Lambda

With efficiencies to 94 percent, operation in temperatures of- 20 to 70 degrees Celsius is possible, derating linearly above 50 C to 30 percent load.

Power

High-voltage DC-DC converters introduced by TDK Lambda

These non-isolated DC-DC converter power supplies can operate from a nominal 12-volt input, and deliver output voltages ranging from 180 to 2,000 volts.

Power

Power electronics buffer modules introduced by TDK-Lambda

The ZBM20 series provides 380-millisecond hold-up time to prevent data loss during brief power interruptions or enabling equipment to shut down safely.

Power

C-DC converters for power uses introduced by TDK Lambda

The i7A series uses 1/16th brick pinout, and can work with a single-output 24-, 36-, or 48-volt AC-DC power supply with or without battery backup.

Power

DC-DC converters to power communications introduced by TDK

With an input range of 9 to 53 volts DC, users can adjust the output from 5 to 28 volts, and switch from voltage reduction to voltage increase operation.

Power

DC-DC converter for data communications from TDK Lambda

The half-brick package measures 61 by 12.7 by 57.9 millimeters, and has remote on-off, over-current, and over-voltage protection.

Power

DC-DC converter for power electronics offered by Sager

With efficiencies to 97.5 percent, power losses are minimized to operate in harsh ambient temperatures of -40 to 125 degrees Celsius.

Power

Rugged power supplies for test uses offered by TDK Lambda

Power supplies rated at to 2000 Watts, come with as many as 18 outputs, have means of patient protection (MoPPs) isolation, and low acoustic noise.

Buyer’s Guide Listing Information

Click here for listing information and directions on how to add or update your company.

Request More Information From TDK-Lambda Americas

Additional content from TDK-Lambda Americas

Power

EMC filters for harsh environments offered by TDK Lambda

The FQA series offers high differential and common-mode noise attenuation to simplify system-level compliance to MIL-STD-461G standards.